====== Fixers ======
This page collects the formulas for a few different (simple) fixers.

===== Preparations =====

<WRAP myRecipe>
**Hypo, plain**\\
For use as a second fix prior to toning, etc.
| Water (52°C)      | 2000 ml         |
| Sodiumthiosulfate | 480 gr          |
Will fix a print within 30 sec. Solution has a short shelf-life and should be used directly. An acidic stop must be used before fixing, otherwise staining might occur.
</WRAP>


<WRAP myRecipe>
**Hypo, acidic**\\
For use as a second fix prior to toning, etc.
| Water (52°C)      | 2000 ml         |
| Sodiumthiosulfate | 480 gr          |
| Sodiumbisulfite   | 45  gr          |
Use undiluted. This formula can be stored and re-used.
</WRAP>



<WRAP myRecipe>
**Kodak F-24, acidic fix**\\
Non-hardening fix. Acidic.
| Water (52°C)      | 500 ml          |
| Sodiumthiosulfate | 240 gr          |
| Sodiumsulfite     | 10  gr          |
| Sodiumbisulfite   | 25  gr          |
|       or          |                 |
| Citric acid       | 22 gr           |
| Water to make,    | 1000 ml         |
**Film:** Use undiluted. Should clear a film in 5 min. Film fully fixed within 10 min.\\
**Print:** Fix in two consecutive baths for 5 min each. If fixing prints prior to toning, second bath should instead be a plain hypo.
</WRAP>

===== Instructions for use =====
Here is a general description on how to proceed
  - Step 1
  - Then do this
  - And then this

===== Notes =====
This is the place to write down notes, tips etc.\\