Differences

This shows you the differences between two versions of the page.

--- wiki:darkroom:printing:toning [2022/05/01 21:09] – henpe
+++ wiki:darkroom:printing:toning [2022/05/08 16:48] (current) – henpe
@@ Line 2: / Line 2: @@
 ===== Datasheets =====
-  * {{datasheets:chemistry:kodak_toning_g23.pdf|Kodak G23}}
+  * {{datasheets:chemistry:kodak_toning_g23.pdf|Kodak G23 (Sepia and KRST)}}
   * {{datasheets:chemistry:tetenal_gold_toner.pdf|Tetenal Gold Toner}}
+  * {{datasheets:chemistry:agfa_bw_paper_chemicals_en.pdf|Agfa Black and White Paper Chemicals (Viradon)}}
 ===== Selenium Toning =====
-See chemistry page on [[darkroom:chemistry:selenium|Selenium toners]]
+See chemistry page on [[wiki:darkroom:chemistry:selenium|Selenium toners]]
 ==== My notes ====
@@ Line 16: / Line 17: @@
 ===== Poly-sulphide toning =====
-See chemistry page on [[darkrom:chemistry:viradon|Viradon]]
+See chemistry page on [[wiki:darkroom:chemistry:viradon|Viradon]]
@@ Line 31: / Line 32: @@
 Best approach is to tone in sepia first.
-  - Bleach, preferably in dilute bleach to slow down the process. The use of diluted bleach is to confine the bleaching to the light and middle tones only; a dilution between 1:4 to 1:10 is a good starting point. If the aim is to only tone highlights, a 1:1 dilution is probably more suitable. Bleach for a short time only, 10-15 seconds without agitation should be enough.
+  - Bleach, preferably in dilute bleach to slow down the process. The use of diluted bleach is to confine the bleaching to the light and middle tones only; a dilution between 1:4 to 1:10 is a good starting point. If the aim is to only tone highlights, a 1:1 dilution is probably more suitable. Bleach by inspection, but for a short time only and without agitation(?).
   - Rinse the print in running water for 2 minutes.
   - Immerse print in toning bath and agitate for approx 60 sec.
@@ Line 37: / Line 38: @@
   - Tone in selenium
   - Hypo-clear
-  - Wash
+  - Final wash
+== Notes ==
+ - From experience, it seems like the sepia toning accelerates and becomes more apparent after toning and while rinsing the print.
@@ Line 47: / Line 52: @@
 === Samples ===
-  * //Feraholmen//: (add records...)
+  * {{https://portfolio.henpe.se/picture/24/category/landscape-water|Feraholmen}}: (add records...)